Porsche 991.2 - Soul Performance Sports Manifolds
DEVELOPMENT:
We sought out to maximize performance and boost response while minding clearance on daily driven cars. Our optimized 3 into 1 merge collector design improves response over the poor factory design, while our runners ultimately increase exhaust velocity into the collector and turbo.
Looking into the factory headers you will notice a support in the middle runner which is detrimental to a smooth flow path out of that exhaust port – all in all the design is very basic with lots of room for improvement. The factory turbo inlet measures around 1.54” ID and we sized our header outlet to 1.63” for a smooth flow path into the turbo.
The internal volume of the header combined with the resulting design improvements pairs well with the efficiency map of the turbo giving you noticeably quicker boost response and more power throughout the RPM range. Pushing the gas pedal down commands faster feedback from the car and each gear has more usable power before a downshift.
The factory header utilizes a double wall design while our design is single wall yielding in a more pleasing, sharper edge to the exhaust and increased turbo sound. Exhaust volume and tone quality are delightfully increased without yielding drone or undesirable qualities. Expect more burbles and sharper pops between shifts and on deceleration.
Soul Performance Products performance headers increase power, response, and sound without compromising ground clearance.
+ Fits all Porsche 991.2 Carrera vehicles
+ Max power gains of approximately 12 whp and 20 ft-lbs of torque (as tested on Base model with ECU tune)
+ Weighs 5.4 lbs / 2.4 kg less than factory exhaust components (9.9 lbs vs 15.3 lb)
+ All Soul Performance Products exhaust components are backed by our Lifetime Warranty for both street and track use
DEVELOPMENT:
We sought out to maximize performance and boost response while minding clearance on daily driven cars. Our optimized 3 into 1 merge collector design improves response over the poor factory design, while our runners ultimately increase exhaust velocity into the collector and turbo.
Looking into the factory headers you will notice a support in the middle runner which is detrimental to a smooth flow path out of that exhaust port – all in all the design is very basic with lots of room for improvement. The factory turbo inlet measures around 1.54” ID and we sized our header outlet to 1.63” for a smooth flow path into the turbo.
The internal volume of the header combined with the resulting design improvements pairs well with the efficiency map of the turbo giving you noticeably quicker boost response and more power throughout the RPM range. Pushing the gas pedal down commands faster feedback from the car and each gear has more usable power before a downshift.
The factory header utilizes a double wall design while our design is single wall yielding in a more pleasing, sharper edge to the exhaust and increased turbo sound. Exhaust volume and tone quality are delightfully increased without yielding drone or undesirable qualities. Expect more burbles and sharper pops between shifts and on deceleration.
Soul Performance Products performance headers increase power, response, and sound without compromising ground clearance.
+ Fits all Porsche 991.2 Carrera vehicles
+ Max power gains of approximately 12 whp and 20 ft-lbs of torque (as tested on Base model with ECU tune)
+ Weighs 5.4 lbs / 2.4 kg less than factory exhaust components (9.9 lbs vs 15.3 lb)
+ All Soul Performance Products exhaust components are backed by our Lifetime Warranty for both street and track use
DEVELOPMENT:
We sought out to maximize performance and boost response while minding clearance on daily driven cars. Our optimized 3 into 1 merge collector design improves response over the poor factory design, while our runners ultimately increase exhaust velocity into the collector and turbo.
Looking into the factory headers you will notice a support in the middle runner which is detrimental to a smooth flow path out of that exhaust port – all in all the design is very basic with lots of room for improvement. The factory turbo inlet measures around 1.54” ID and we sized our header outlet to 1.63” for a smooth flow path into the turbo.
The internal volume of the header combined with the resulting design improvements pairs well with the efficiency map of the turbo giving you noticeably quicker boost response and more power throughout the RPM range. Pushing the gas pedal down commands faster feedback from the car and each gear has more usable power before a downshift.
The factory header utilizes a double wall design while our design is single wall yielding in a more pleasing, sharper edge to the exhaust and increased turbo sound. Exhaust volume and tone quality are delightfully increased without yielding drone or undesirable qualities. Expect more burbles and sharper pops between shifts and on deceleration.
Soul Performance Products performance headers increase power, response, and sound without compromising ground clearance.
+ Fits all Porsche 991.2 Carrera vehicles
+ Max power gains of approximately 12 whp and 20 ft-lbs of torque (as tested on Base model with ECU tune)
+ Weighs 5.4 lbs / 2.4 kg less than factory exhaust components (9.9 lbs vs 15.3 lb)
+ All Soul Performance Products exhaust components are backed by our Lifetime Warranty for both street and track use